YYC-7 Display Automation Cycle Timer Control Relay Switch Module F0S0

Description

Features:
Low voltage for power , the lowest is 3V, convenient for use.
Can be powered by 3.7V lithium , 5V , switch , transformer, etc.
Adjustable delay : 0.1s to 999 minutes.
The use of opto isolated input and output, enhanced - capability and consumption.
The setting parameters can be memorized after off.
To ensure stability, industrial grade board.
Applied to control motor, , light string, mini pump, etc.
Notice:
Relay output is passive without output, and it control the on and off of the line.
Working modes selection: after on, long press K1 for 2s, later into the selection of modes: P1~4; K2 to enter the mode.
P-1: A signal to trigger relay, is up, the relay disconnect;
P-2: A signal trigger and countdown begins, T1 seconds after, the relay closes seconds, then opens;
P-3: Connect T1 seconds, disconnect seconds, infinite loop. Users can set the relay T1 and ;
P-4: The relay closes when a signal triggers, when the trigger signal disappears, digital countdown begins, and the relay opens when the is up.
Specifications:
Display: Digital Display
Timing (Adjustable): 0.1s to 999 minutes
Working Voltage: 3-7V(with mini jumper: 3-5.5V; without mini jumper: 3.8-7V)
Signal Source: 3-
Output Capacity: Can Control the Load within 30V 3A or AC 3A
Static Current: 15mA
Working Current: 30mA
Working Temperature: -40-85°C
Size: 64 * 35 * 15mm / 2.52 * 1.4 * 0.in (L * W * H)
Weight: 20g / 0.72oz
Package List: E1223
1 * Delay Timer Module