-40%

Triple Aught Design TAD Ares DIVER-1 New

$ 2085.6

Availability: 100 in stock
  • All returns accepted: ReturnsNotAccepted
  • Condition: New

    Description

    Triple Aught Design TAD Ares DIVER-1 New. Only 50 pieces will be made. Beautiful craftsmanship on this watch! One of the best I’ve seen…. Specs are below. Thanks for looking.
    DIVER-1 MOVEMENT
    Your DIVER-1 Mission Timer is manufactured with a precision Swiss movement, either quartz or automatic.
    Swiss Automatic: ARES currently uses ETA Swiss movements for our automatic DIVER-1 (ETA 2824) and our automatic GMT (ETA 2893-2) that are assembled & tuned by ARES watchmakers, including perlage & finishing.
    DIVER-1 CASE, CASEBACK, CROWN & BEZEL
    “Urban” bead blast stainless steel case
    41.0mm 316L stainless steel two piece case with individually serialized, engraved, screwback construction.
    42.0mm 316L stainless steel bezel, featuring countdown timer with C3 Superluminova, clear coat finish, aggressive ‘no slip’ teeth, and 120-click uni-directional countdown mission timer.
    49.5mm lug to lug 22mm drilled lugs with 1.8mm shoulderless spring bars, supplied with a 3-ring LASH ballistic nylon strap.
    10 o’clock ‘fat head’ 7.2mm logo’d screw down crown, featuring aggressive ‘no slip’ teeth and double Viton seals.
    13.3mm overall thickness
    3.3oz total weight with LASH strap
    CRYSTAL, DIAL & HANDS
    Flat sapphire crystal with inner anti-reflective AR coating
    Brass dial with Super LumiNova C3 printed hour indicators, painted minute indices and logo
    Brushed hands with C3, with either brushed stainless or red seconds hand
    PERFORMANCE & TESTING
    Individually tested and certified, fully assembled, to 100BAR = 3345ft.
    Anti-magnetic rating 18.8Oe, shock resistant to NIHS-91-10 standards, and thermo-compensated -0 to 50+ C
    LASH & RUBBER STRAPS
    Combo Urban & PVD = Urban Grey with PVD Hardware
    HAND ASSEMBLED IN THE USA