-40%

Drop-In Replacement Phono Cartridge fits RCA 45-EY-2 Record Player Phonograph

$ 21.09

Availability: 114 in stock
  • Refund will be given as: Money Back
  • Condition: New
  • Restocking Fee: No
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Buyer

    Description

    It's time to dig out those old 45's
    and have a party with
    The Redhead
    On your Classic
    RCA Victor
    45 RPM Record Player
    No need for installation "options" with our exact fit
    replacement phono cartridge for your RCA Victor
    Model 45-EY-2 "45" RPM Record Player Phonograph.
    The output pins match your originals perfectly and if
    your originals are damaged or missing we include an
    extra pair with every cartridge
    The Redhead is a Stereo cartridge bridged for Mono
    so you will safely play your Stereo 45's with no risk
    of damage.
    Step One
    We pre-test every cartridge for sound quality and output in
    our Blue-Arm test jig featuring a custom made plug-in tone-arm.
    Step Two
    We believe that soldering output leads to a cartridge is an unprofessional shortcut.
    The amount of heat necessary to insure a good connection creates the risk of damage to the cartridge with degraded sound quality that may show up now or later.
    We assemble precision connectors and install using no heat.
    Step Three
    The cartridge mounting angle was confirmed by comparing to a
    commercial turntable by Innotech that uses the identical cartridge.
    Step Four
    Every completed Redhead cartridge is tested for
    exceptional performance in our Clear-Arm test jig
    Step Five
    Installation Instructions
    The RCA 45 player must be in good condition.
    The idler wheel, rubber motor mounts and cycle cam need to be checked
    and replaced as necessary. The tone arm must move freely with no binding.
    Clean and lubricate the motor to insure correct speed.
    1
    ) Please handle the
    "Redhead"
    cartridge carefully.
    2)
    Remove the old cartridge
    3)
    Install
    "Redhead"
    cartridge using the old screws and new washers supplied.
    4)
    Reattach leads, positive side
    (+)
    is identified with a red dot on cartridge.
    5)
    The ground or third wire is not necessary, tape off or remove.
    6)
    Adjust the correct tone-arm landing by referring to the instructions on the enclosed CD
    7)
    The conversion cartridge weighs just about the same as the original cartridge however
    you may need to "fine-tune" the counterbalance for best performance.
    8)
    This cartridge is rated for 2 to 4 grams of pressure. We have found that 4 grams provides
    excellent tracking in our test jig.
    Typical installation in RCA RP-190 Tone Arm
    Typical installation in RCA RP-168 Tone Arm
    Just to be sure your RCA 45 changer is assembled and adjusted correctly
    we will include with your
    Redhead
    Conversion Kit a data CD with complete
    service and adjustment information for both the RP-168 and RP-190 changers
    "No questions asked" Guarantee
    If for any reason you are not thrilled with the performance of
    The Redhead Tone-Arm Cartridge
    just send it back for a full refund
    "No Questions Asked"