Door Handle Pull Armrest Driver+Passenger for 03-19 GMC Savanna 1500/2500/3500

Description

Feature The door handle is made of automobile grade plastic, with high strength and durability Standardized quality control procedures to make sure the quality. Directly replace the original damaged or old parts. Perfect fit and easy installation.
Specification Model:CA-62A FITS FRONT DRIVER SIDE (LEFT SIDE) Direct Replacement for OEM # 10388390 NO MODIFICATION NEEDED Plastic, Gray (Pewter), Textured Finish Built to strict quality control standards
Door Handle Pull Armrest Driver+Passenger for 03-19 GMC Savanna 1500/2500/3500
Feature
The door handle is made of automobile grade plastic, with high strength and durability
Standardized quality control procedures to make sure the quality.
Directly replace the original damaged or old parts.
Perfect fit and easy installation.
Specification
Model:CA-62A
FITS FRONT DRIVER SIDE (LEFT SIDE)
Direct Replacement for OEM # 10388390 NO MODIFICATION NEEDED
Plastic, Gray (Pewter), Textured Finish
Built to strict quality control standards
Fits:
2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, and 2018 Chevrolet Express 1500, 2500, 3500
2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, and 2018 GMC Savana 1500, 2500, 3500
Package List
1 x Complete LH door handle
1 x Complete RH door handle
USE
Step 1: Remove the door panel screws. Locate all the screws before you start pulling on the door panel.Some screws are out in the open, but others may have a small trim cover on them. Some can be hidden behind the grab handle as well as around the outer edge of the door panel.
Step 2: Separate the door panel from the fasteners/clips. Using the appropriate trim panel removal tool, feel around the outer edge of the door panel.Typically, you’ll want to feel the front edge, down along the lower edge and around the back of the door opening. There may be several clips holding the panel in place. Insert the trim panel removal tool between the door and interior panel and gently pry the door panel loose from the clips.
Note: Be gentle as these clips can break easily.
Step 3: Remove the door trim panel. Once separated from the retaining clips, gently push up on the door panel from the bottom.The top edge of the door panel will pop up along the window. At this point, reach around behind the door panel to unplug any electrical connectors for the power window/door lock/trunk/fuel door release buttons. To fully lift the door panel out of place, you will have to angle the door panel and/or the door handle assembly to pull it back through the opening in the door panel to lift it completely off.
Step 4: Remove the plastic vapor barrier if needed. Take care to remove the vapor barrier intact and do not cut it open.On some vehicles, the inner door must remain sealed properly as side air bag sensors may rely on pressure changes within the door for side impact airbags to deploy. If it is already damaged or damaged during replacement, replace the vapor barrier as soon as possible.
Step 5: Remove the inner door handle mechanism. Unscrew any nuts or bolts holding the door handle in place.There will be a rod from the inner door handle to the door latch mechanism, usually held together by plastic clips. Carefully detach them, remove the broken handle, and replace it with the new one.
Step 6: Loosely reinstall the inner door panel. Test both the inner and outer door handle functions before securing anything in place.Once you have verified the operation of both, reconnect any electrical connectors you removed and snap the door panel back into the retaining clips. If any were broken during disassembly, visit your local auto parts store or dealership for replacements.
Step 7: Reinstall all screws and trim pieces. Once the door panel is secured onto the retaining clips, reinstall all screws and trim pieces.Hand tight is perfectly fine, no need to over-tighten them.
Shipping
All items will be shipped out in 1 business day,no expedited service available.
(USA only,Does NOT include Hawaii，Alaska or Puerto Rico, PO Boxes/APO's)
Contact us
Any Questions,Just feel free to contact us on eBay.We will reply you in 1 business day.
Item Specifics
Superseded Part Number
Replace for 25750064,10388390,10388389
Item Condition
New
Brand
Unbranded
Interchange Part Number
25750064/10388390/10388389, 10388390, 11588650, 25750064
Installation instructions
NO
Manufacturer Warranty
2 Years
Number of Pieces
2
Color
Gray
Fitment Type
Direct Replacement
Manufacturer Part Number
25750064、10388390、10388389、11588650
Mounting Hardware Included
No
Material
Plastic
Country/Region of Manufacture
Unknown
Installation Instruction
Not Included
Modified Item
No
Placement on Vehicle
Front, Left, Right Side
OE/OEM Part Number
25750064、10388390、10388389、11588650
Universal Fitment
No
Fitment 1
2003 - 2019 Chevrolet Express 1500/2500/3500
Fitment 2
2003 - 2019 GMC Savanna 1500/2500/3500
Payment
1. We can only accept payment from PayPal.
2. Please keep the consistency of Paypal address and ebay address.
Shipping
1. All items will be shipped in 48 hours after receiving your payment .
2. We ship this item to US only via USPS first class mail. It usually takes 3-5 working days to deliver.
Returns
1. We offer 30 days return policy.
2. Please contact us within 30 days from the date you receive your package if you have any questions with the products .
3. Refund will be sent after we got your returned package.
4. All returned items should be in the original packaging with tracking number.
Contact Us
We work from Monday -
Saturday
9:00AM - 6:00PM PST, but we will reply you once we get your message .There will be some delay on response if you send message or E-Mail on Sunday.
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
LED Interior Lights
LED Signal Light Bulbs
◈  3157/3156
◈  7443/7440
◈  1157/BAY15D
◈  BAU15S/7507
LED Fog Light Bulbs
◈  H8 H9 H11 H16
◈  9006 HB4
◈  9145/9140/H10
◈  5202
◈  880
◈  881
◈  H3
◈  Fog Light Assemblies
LED Headlight Bulbs
◈  H11/H8
◈  H11B
◈  H1
◈  H7
◈  H15
LED 3RD Brake Light
LED Side Marker Lights
LED Side Mirror Lights
LED License Plate Light
Car Window Switch
Car Exhaust Pipe
Car Boat Switch Panel
Rubber Seal Strip
Car Antenna
Center Console Lid
Control Knob
Car Door Handles
Car Mud Flaps
Motorcycle Parts
Other
Hot item
10x AUXITO Super Bright Canbus T10 194 168 LED light Bulb xenon white 24SMD 2825
USD 15.88
2X T10 168 194 Amber Yellow LED Canbus No Error License Side Marker Light Bulb
USD 8.99
4x AUXITO T15 921 LED Back up Reverse Light Bulb 2400LM Xenon White Error Free
USD 13.59
CANBUS AUXITO 1157 LED Turn Signal Brake Reverse Parking Light Bulb 6500K White
USD 11.59
2X AUXITO RED 3157 4157 LED Brake Stop Tail Turn Signal Indicator Light Bulb D
USD 15.99
AUXITO 9006 HB4 LED Fog Light Bulbs 6500K for Toyota Tundra 2000 2002 2004 2006
USD 18.99
AUXITO H16 5202 CSP LED Fog Light Bulb 6000K Fit for 2007-2018 GMC Sierra 3500HD
USD 17.99
AUXITO H4 9003 LED Headlight Kit Hi Lo Beam Bulb 20000LM 6000K White High Power
USD 27.99
AUXITO H13 9008 LED Headlight Bulb Hi Lo 20000LM 6000K White for Nissan Sentra
USD 26.89
AUXITO 9012 LED Headlight Bulbs for 2017 Toyota Corolla iM RAV4 Hi/Lo Beam Light
USD 20.99
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
Door Handle Pull Armrest Driver+Passenger for 03-19 GMC Savanna 1500/2500/3500
Feature
The door handle is made of automobile grade plastic, with high strength and durability
Standardized quality control procedures to make sure the quality.
Directly replace the original damaged or old parts.
Perfect fit and easy installation.
Specification
Model:CA-62A
FITS FRONT DRIVER SIDE (LEFT SIDE)
Direct Replacement for OEM # 10388390 NO MODIFICATION NEEDED
Plastic, Gray (Pewter), Textured Finish
Built to strict quality control standards
Fits:
2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, and 2018 Chevrolet Express 1500, 2500, 3500
2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, and 2018 GMC Savana 1500, 2500, 3500
Package List
1 x Complete LH door handle
1 x Complete RH door handle
USE
Step 1: Remove the door panel screws. Locate all the screws before you start pulling on the door panel.Some screws are out in the open, but others may have a small trim cover on them. Some can be hidden behind the grab handle as well as around the outer edge of the door panel.
Step 2: Separate the door panel from the fasteners/clips. Using the appropriate trim panel removal tool, feel around the outer edge of the door panel.Typically, you’ll want to feel the front edge, down along the lower edge and around the back of the door opening. There may be several clips holding the panel in place. Insert the trim panel removal tool between the door and interior panel and gently pry the door panel loose from the clips.
Note: Be gentle as these clips can break easily.
Step 3: Remove the door trim panel. Once separated from the retaining clips, gently push up on the door panel from the bottom.The top edge of the door panel will pop up along the window. At this point, reach around behind the door panel to unplug any electrical connectors for the power window/door lock/trunk/fuel door release buttons. To fully lift the door panel out of place, you will have to angle the door panel and/or the door handle assembly to pull it back through the opening in the door panel to lift it completely off.
Step 4: Remove the plastic vapor barrier if needed. Take care to remove the vapor barrier intact and do not cut it open.On some vehicles, the inner door must remain sealed properly as side air bag sensors may rely on pressure changes within the door for side impact airbags to deploy. If it is already damaged or damaged during replacement, replace the vapor barrier as soon as possible.
Step 5: Remove the inner door handle mechanism. Unscrew any nuts or bolts holding the door handle in place.There will be a rod from the inner door handle to the door latch mechanism, usually held together by plastic clips. Carefully detach them, remove the broken handle, and replace it with the new one.
Step 6: Loosely reinstall the inner door panel. Test both the inner and outer door handle functions before securing anything in place.Once you have verified the operation of both, reconnect any electrical connectors you removed and snap the door panel back into the retaining clips. If any were broken during disassembly, visit your local auto parts store or dealership for replacements.
Step 7: Reinstall all screws and trim pieces. Once the door panel is secured onto the retaining clips, reinstall all screws and trim pieces.Hand tight is perfectly fine, no need to over-tighten them.
Shipping
All items will be shipped out in 1 business day,no expedited service available.
(USA only,Does NOT include Hawaii，Alaska or Puerto Rico, PO Boxes/APO's)
Contact us
Any Questions,Just feel free to contact us on eBay.We will reply you in 1 business day.
Payment
Shipping
Returns
Contact Us
1. We can only accept payment from PayPal.
2. Please keep the consistency of Paypal address and ebay address.
1. All items will be shipped in 48 hours after receiving your payment .
2. We ship this item to US only via USPS first class mail. It usually takes 3-5 working days to deliver.
1. We offer 30 days return policy.
2. Please contact us within 30 days from the date you receive your package if you have any questions with the products .
3. Refund will be sent after we got your returned package.
4. All returned items should be in the original packaging with tracking number.
We work from Monday -
Saturday
9:00AM - 6:00PM PST, but we will reply you once we get your message .There will be some delay on response if you send message or E-Mail on Sunday.
All rights reserved.
On Sep 12, 2022 at 17:24:08 PDT, seller added the following information: