03-11 Lincoln Town Car Pull Strap Cap Repair Kit (for 2 Door straps) Free Ship!

Description

03-11 Lincoln Town Car Pull Strap Cap Repair Kit (for 2 Door straps) - Fast Free Shipping!
Are your door strap caps not staying on? This is a common issue caused when the plastic tabs on the door strap mount breaking. We have developed a fix to repair this issue!
You get 2 kits (enough to do 2 of your 4 doors) along with detailed instructions and all hardware needed. The repair is fast and easy and only takes about 10 minutes!
We stand behind our product, If you have any issues contact us and we will resolve them! Just contact us for a fast response!
** Cover caps and pull straps are not included -  you get 2 sets of repair tabs that the caps attach to **
Door Pull Strap Repair Kit for 2003 – 2011 Lincoln Town Car
Installation Instructions
1.
Remove the old door strap by gently prying off the cover cap (if still present) by inserting a flat screwdriver under the top of the cap and gently pulling upward and outward. Be careful not to damage the cap or pull strap leather with the screwdriver. Unscrew the 2 Phillips screws holding the strap to the door.
2.
Using a 1/4 drill bit, drill out the rivet from the inside the door strap. Do not drill the rivet from the back of the door strap but from the front recessed area under the leather handle. Repeat this step for the other side.
3.
Install new plastic tabs to each side by placing the metal part of the door strap into the new plastic tab. The holes should align. Screw the tab onto the handle from the rear. Snug, don’t over tighten.
4.
Reinstall the door strap to the door by inserting the original Philips screws back into the handle through the tab hole. (The short screw goes in the hole toward the front of the car and long screw in the hole toward the rear of the car). Once the handle is installed slide the cover caps over the strap first then press the end of the cap down to snap it into place.